Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Carb Synchronizing

Need help restoring, building, or finding then try here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Post Reply
Message
Author
TIKI
new poster
Posts: 4
Joined: 10th Dec 2014
Location: Northern Ca.

Carb Synchronizing

#1 PostAuthor: TIKI » Fri Apr 27, 2018 5:18 am

Hi All,

I have a 1973 Z1 and want to sync the carbs after a good cleaning and reassembly. There is no mention in either of my manuals regarding the Fixed synchronizer cap on carb #4 , can someone explain this to me or point me in the right direction as to how this works. The manual explains setting each slide at 0.6mm-0.7mm from the bottom of the bore to the top of the notch am I doing this to #4 then matching #1,2,3, to that? Thanks Randy
1973 Kawasaki Z1 900 , 1976 Yamaha DT400C , 1971 Suzuki TM-400R Cyclone
Top
User avatar
DogsbolloxofZ1B
Hardcore
Hardcore
Posts: 1440
Joined: 28th Feb 2006
Location: Near Chichester

Re: Carb Synchronizing

#2 PostAuthor: DogsbolloxofZ1B » Sat Apr 28, 2018 4:17 pm

Yes exactly correct. No.4 is set as your master.
Make sure you follow manual and set the overall
idle adjustment correctly first that way you’ll be
able to adjust up/down uniformly around mid point.
Top
TIKI
new poster
Posts: 4
Joined: 10th Dec 2014
Location: Northern Ca.

Re: Carb Synchronizing

#3 PostAuthor: TIKI » Sun Apr 29, 2018 5:15 am

Thanks DogsbolloxofZ1B
1973 Kawasaki Z1 900 , 1976 Yamaha DT400C , 1971 Suzuki TM-400R Cyclone
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 179 guests