Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Stainless Steel Bolts - Ok or Not?

Need help restoring, building, or finding then try here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Message
Author
Mr Bump
100Club
100Club
Posts: 382
Joined: 30th Dec 2015

Re: Stainless Steel Bolts - Ok or Not?

#16 PostAuthor: Mr Bump » Sun Jun 10, 2018 7:11 am

Blackseven wrote:Why would it be a problem to use stainless on the camshaft bearing caps?

You might (maybe) if yr very unlucky find that the stainless behaves differently under the very high frequency altering load from the cams and stretches or snaps. I’m not a metallurgist so I’m no expert but there doesn’t seem to be any point in deviating from oem bolts there. On later gpz motors the cam bolts changed I think so that they had an unusually thin shank, so kawsaki presumably felt the need to tune the way these bolts behave under tension.

Only other thing against stainless is that I’ve found that the hex socket in cap heads tends to relax quite quickly with repeated use, so there’s a higher risk of them rounding off.
'In your twenties you think you are immortal, in your thirties you hope you are immortal, in your forties you just hope it doesn't hurt too much'

Lemmy

cancunia
Regular Poster
Posts: 63
Joined: 29th Dec 2017
Location: Lincoln

Re: Stainless Steel Bolts - Ok or Not?

#17 PostAuthor: cancunia » Sun Jun 10, 2018 8:18 am

Pigford wrote:
Blackseven wrote:Why would it be a problem to use stainless on the camshaft bearing caps?



Think he means there's no real advantage?


Well, that for sure and as also noted above, the small possibility that SSteel bolts may not have the same tensile / work ratings as the original cam cap steel bolts. The high frequency shock loads may or may not (probably not) be an issue for the bolts, possibly more importantly, seems that stainless also expands more when it gets hot so if there is an issue it's likely to be heat related. But overall it's a case of those bolts in particular are well protected and unlikely to need replacing, so if they aint broke, don't fix them. According to the parts list, the bolts for the caps & the cover are the same item so there's probably nothing special about them tensile wise.

User avatar
bulldogbobby
100Club
100Club
Posts: 243
Joined: 19th Feb 2008
Location: Norfolk England

Re: Stainless Steel Bolts - Ok or Not?

#18 PostAuthor: bulldogbobby » Sun Jun 10, 2018 9:13 am

cancunia wrote:
Pigford wrote:
Blackseven wrote:Why would it be a problem to use stainless on the camshaft bearing caps?



Think he means there's no real advantage?


Well, that for sure and as also noted above, the small possibility that SSteel bolts may not have the same tensile / work ratings as the original cam cap steel bolts. The high frequency shock loads may or may not (probably not) be an issue for the bolts, possibly more importantly, seems that stainless also expands more when it gets hot so if there is an issue it's likely to be heat related. But overall it's a case of those bolts in particular are well protected and unlikely to need replacing, so if they aint broke, don't fix them. According to the parts list, the bolts for the caps & the cover are the same item so there's probably nothing special about them tensile wise.


I kept the camshaft bolts original - just changed the cover bolts for S/S
Let The Good Times Roll...........

User avatar
ADRIAN H
Hardcore
Hardcore
Posts: 4528
Joined: 21st Mar 2009
Location: Charminster. Bournemouth

Re: Stainless Steel Bolts - Ok or Not?

#19 PostAuthor: ADRIAN H » Mon Jun 11, 2018 12:20 pm

bulldogbobby wrote:
cancunia wrote:
Pigford wrote:
Blackseven wrote:Why would it be a problem to use stainless on the camshaft bearing caps?



Think he means there's no real advantage?


Well, that for sure and as also noted above, the small possibility that SSteel bolts may not have the same tensile / work ratings as the original cam cap steel bolts. The high frequency shock loads may or may not (probably not) be an issue for the bolts, possibly more importantly, seems that stainless also expands more when it gets hot so if there is an issue it's likely to be heat related. But overall it's a case of those bolts in particular are well protected and unlikely to need replacing, so if they aint broke, don't fix them. According to the parts list, the bolts for the caps & the cover are the same item so there's probably nothing special about them tensile wise.




I kept the camshaft bolts original - just changed the cover bolts for S/S


Threads of both cam cap and cam cover bolts are prone to stretch. You need to check pitch is correct before refitting.
adrianhorsfield@live.co.uk
Sunny Bournemouth. Dorset. UK.

User avatar
bulldogbobby
100Club
100Club
Posts: 243
Joined: 19th Feb 2008
Location: Norfolk England

Re: Stainless Steel Bolts - Ok or Not?

#20 PostAuthor: bulldogbobby » Thu Jun 14, 2018 9:17 am

ADRIAN H wrote:
bulldogbobby wrote:
cancunia wrote:
Pigford wrote:
Blackseven wrote:Why would it be a problem to use stainless on the camshaft bearing caps?



Think he means there's no real advantage?


Well, that for sure and as also noted above, the small possibility that SSteel bolts may not have the same tensile / work ratings as the original cam cap steel bolts. The high frequency shock loads may or may not (probably not) be an issue for the bolts, possibly more importantly, seems that stainless also expands more when it gets hot so if there is an issue it's likely to be heat related. But overall it's a case of those bolts in particular are well protected and unlikely to need replacing, so if they aint broke, don't fix them. According to the parts list, the bolts for the caps & the cover are the same item so there's probably nothing special about them tensile wise.




I kept the camshaft bolts original - just changed the cover bolts for S/S


Threads of both cam cap and cam cover bolts are prone to stretch. You need to check pitch is correct before refitting.


Thanks mate :up
Let The Good Times Roll...........


Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 39 guests