Hi all...I'm building up a spare 900 motor that I recently bought as a stripped down pile of sad looking bits that had been buried deep in a damp shed for the last 20 years & theres of course some / plenty of missing or buggered items ....any one out there used or have any knowledge on those new replacement" Electrex Stators " or a Kawa Z1-Z900 / 1000 they seem good value at about 70 uk Beer Tokens but i don't know any one thats used one ??? I also need the Central top Cam Chain Roller unit "less the rubber mounting block assy that fixes it to the head itself " as I have those .... the main unit I have is a bit - how's your father rusty & noisy to spin with central surrounding pin -chain silencer rubber all breaking up as they do ! & there very Xxy aye ! ...........whats the best value for money one to buy ? ......As too I need just one of the 2 Head / Barrel face - Roller & Pin unit .......any input there please guys !
Has any one got a used but decent set of Std Cams too .......mine are toast (too far gone )due to moisture - rust whilst standing for 20 years+ missing are Tranny inner cover & outer cover+ Alt cover & stator + oil Points inner & outer covers, oil filter cover & bolt assy + starter motor + Cam Cover , ha-ha O well if you don't ask.... ...you never know aye !!!!!!
Thanks in advance to any one taking the trouble to reply to this. Over N Out.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Opinions sort please guy's ?
Moderators: chrisu, paul doran, Taffus, KeithZ1R
-
- 100Club
- Posts: 303
- Joined: 3rd Aug 2013
- Location: Australia
-
- Hardcore
- Posts: 2051
- Joined: 3rd Apr 2009
- Location: leverington UK
Re: Opinions sort please guy's ?
Will look tomorrow i may have cams and cover.
Re: Opinions sort please guy's ?
johny brando wrote:Hi all...I'm building up a spare 900 motor that I recently bought as a stripped down pile of sad looking bits that had been buried deep in a damp shed for the last 20 years & theres of course some / plenty of missing or buggered items ....any one out there used or have any knowledge on those new replacement" Electrex Stators " or a Kawa Z1-Z900 / 1000 they seem good value at about 70 uk Beer Tokens but i don't know any one thats used one ???
ELECTREX STUFF IS NORMALLY VERY GOOD.
I also need the Central top Cam Chain Roller unit "less the rubber mounting block assy that fixes it to the head itself " as I have those .... the main unit I have is a bit - how's your father rusty & noisy to spin with central surrounding pin -chain silencer rubber all breaking up as they do ! & there very Xxy aye ! ...........whats the best value for money one to buy ?
TALK TO ROB (ZED12015) - HE DOES REMANUFACTURED SETS.
......As too I need just one of the 2 Head / Barrel face - Roller & Pin unit .......any input there please guys !
THEY'RE DIRT CHEAP BUY NEW
Has any one got a used but decent set of Std Cams too .......mine are toast (too far gone )due to moisture - rust whilst standing for 20 years+ missing are Tranny inner cover & outer cover+ Alt cover & stator + oil Points inner & outer covers,
oil filter cover & bolt assy
GOT SOME BUT I'D HAVE THOUGHT THE POSTAGE WOULD BE PROHIBITIVE.
+ starter motor + Cam Cover , ha-ha O well if you don't ask.... ...you never know aye !!!!!!
Thanks in advance to any one taking the trouble to reply to this. Over N Out.
-
- 100Club
- Posts: 303
- Joined: 3rd Aug 2013
- Location: Australia
Re: Opinions sort please guy's ?
kev edwards wrote:Will look tomorrow i may have cams and cover.
Thanks Kev .
-
- 100Club
- Posts: 303
- Joined: 3rd Aug 2013
- Location: Australia
Re: Opinions sort please guy's ?
chrisu wrote:johny brando wrote:Hi all...I'm building up a spare 900 motor that I recently bought as a stripped down pile of sad looking bits that had been buried deep in a damp shed for the last 20 years & theres of course some / plenty of missing or buggered items ....any one out there used or have any knowledge on those new replacement" Electrex Stators " or a Kawa Z1-Z900 / 1000 they seem good value at about 70 uk Beer Tokens but i don't know any one thats used one ???
ELECTREX STUFF IS NORMALLY VERY GOOD.
I also need the Central top Cam Chain Roller unit "less the rubber mounting block assy that fixes it to the head itself " as I have those .... the main unit I have is a bit - how's your father rusty & noisy to spin with central surrounding pin -chain silencer rubber all breaking up as they do ! & there very Xxy aye ! ...........whats the best value for money one to buy ?
TALK TO ROB (ZED12015) - HE DOES REMANUFACTURED SETS.
......As too I need just one of the 2 Head / Barrel face - Roller & Pin unit .......any input there please guys !
THEY'RE DIRT CHEAP BUY NEW
Has any one got a used but decent set of Std Cams too .......mine are toast (too far gone )due to moisture - rust whilst standing for 20 years+ missing are Tranny inner cover & outer cover+ Alt cover & stator + oil Points inner & outer covers,
oil filter cover & bolt assy
GOT SOME BUT I'D HAVE THOUGHT THE POSTAGE WOULD BE PROHIBITIVE.
+ starter motor + Cam Cover , ha-ha O well if you don't ask.... ...you never know aye !!!!!!
Thanks in advance to any one taking the trouble to reply to this. Over N Out.
Thanks Chris . Yeh the Electrex stuff appears good ..so buying that new is the way for me to go then ...thanks for input. I'll get in touch with Rob then ...he's definitely got his finger on the pulse aye & if it's OK for him it must be alright. Thanks again. I'll check out Uk to Oz postage ( I'll weigh the cams I have & investigate & get back to you. (stuck record = Thanks yet again )
Re: Opinions sort please guy's ?
Pm sent Lee..
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
Re: Opinions sort please guy's ?
johny brando wrote:chrisu wrote:johny brando wrote:Hi all...I'm building up a spare 900 motor that I recently bought as a stripped down pile of sad looking bits that had been buried deep in a damp shed for the last 20 years & theres of course some / plenty of missing or buggered items ....any one out there used or have any knowledge on those new replacement" Electrex Stators " or a Kawa Z1-Z900 / 1000 they seem good value at about 70 uk Beer Tokens but i don't know any one thats used one ???
ELECTREX STUFF IS NORMALLY VERY GOOD.
I also need the Central top Cam Chain Roller unit "less the rubber mounting block assy that fixes it to the head itself " as I have those .... the main unit I have is a bit - how's your father rusty & noisy to spin with central surrounding pin -chain silencer rubber all breaking up as they do ! & there very Xxy aye ! ...........whats the best value for money one to buy ?
TALK TO ROB (ZED12015) - HE DOES REMANUFACTURED SETS.
......As too I need just one of the 2 Head / Barrel face - Roller & Pin unit .......any input there please guys !
THEY'RE DIRT CHEAP BUY NEW
Has any one got a used but decent set of Std Cams too .......mine are toast (too far gone )due to moisture - rust whilst standing for 20 years+ missing are Tranny inner cover & outer cover+ Alt cover & stator + oil Points inner & outer covers,
oil filter cover & bolt assy
GOT SOME BUT I'D HAVE THOUGHT THE POSTAGE WOULD BE PROHIBITIVE.
+ starter motor + Cam Cover , ha-ha O well if you don't ask.... ...you never know aye !!!!!!
Thanks in advance to any one taking the trouble to reply to this. Over N Out.
Thanks Chris . Yeh the Electrex stuff appears good ..so buying that new is the way for me to go then ...thanks for input. I'll get in touch with Rob then ...he's definitely got his finger on the pulse aye & if it's OK for him it must be alright. Thanks again. I'll check out Uk to Oz postage ( I'll weigh the cams I have & investigate & get back to you. (stuck record = Thanks yet again )
lee - i meant the oil filter stuff - not the cams....
-
- 100Club
- Posts: 303
- Joined: 3rd Aug 2013
- Location: Australia
Re: Opinions sort please guy's ?
chrisu wrote:johny brando wrote:chrisu wrote:johny brando wrote:Hi all...I'm building up a spare 900 motor that I recently bought as a stripped down pile of sad looking bits that had been buried deep in a damp shed for the last 20 years & theres of course some / plenty of missing or buggered items ....any one out there used or have any knowledge on those new replacement" Electrex Stators " or a Kawa Z1-Z900 / 1000 they seem good value at about 70 uk Beer Tokens but i don't know any one thats used one ???
ELECTREX STUFF IS NORMALLY VERY GOOD.
I also need the Central top Cam Chain Roller unit "less the rubber mounting block assy that fixes it to the head itself " as I have those .... the main unit I have is a bit - how's your father rusty & noisy to spin with central surrounding pin -chain silencer rubber all breaking up as they do ! & there very Xxy aye ! ...........whats the best value for money one to buy ?
TALK TO ROB (ZED12015) - HE DOES REMANUFACTURED SETS.
......As too I need just one of the 2 Head / Barrel face - Roller & Pin unit .......any input there please guys !
THEY'RE DIRT CHEAP BUY NEW
Has any one got a used but decent set of Std Cams too .......mine are toast (too far gone )due to moisture - rust whilst standing for 20 years+ missing are Tranny inner cover & outer cover+ Alt cover & stator + oil Points inner & outer covers,
oil filter cover & bolt assy
GOT SOME BUT I'D HAVE THOUGHT THE POSTAGE WOULD BE PROHIBITIVE.
+ starter motor + Cam Cover , ha-ha O well if you don't ask.... ...you never know aye !!!!!!
Thanks in advance to any one taking the trouble to reply to this. Over N Out.
Thanks Chris . Yeh the Electrex stuff appears good ..so buying that new is the way for me to go then ...thanks for input. I'll get in touch with Rob then ...he's definitely got his finger on the pulse aye & if it's OK for him it must be alright. Thanks again. I'll check out Uk to Oz postage ( I'll weigh the cams I have & investigate & get back to you. (stuck record = Thanks yet again )
lee - i meant the oil filter stuff - not the cams....
Chris - OK My mistake , sorry !
Who is online
Users browsing this forum: Gus and 65 guests