Page 1 of 1

Z900 Valves

Posted: Thu Jun 14, 2018 9:31 pm
Author: kawasaki_man
I was just removing the valves from a z900 head and found an additional shim under each of the lower valve spring seats. The shims are all stamped VSI and 203. Please see photos of the item below. Can anyone lets me know anything about these items as they don't appear to be listed in the parts manual.
valve spring seat_1.jpg

valve spring seat_2.jpg

Re: Z900 Valves

Posted: Fri Jun 15, 2018 7:14 am
Author: johny brando
kawasaki_man wrote:I was just removing the valves from a z900 head and found an additional shim under each of the lower valve spring seats. The shims are all stamped VSI and 203. Please see photos of the item below. Can anyone lets me know anything about these items as they don't appear to be listed in the parts manual.
valve spring seat_1.jpg
valve spring seat_2.jpg


There used for setting your valve spring height after your seats have been cut.

Re: Z900 Valves

Posted: Fri Jun 15, 2018 10:15 pm
Author: z1bman
johny brando wrote:
kawasaki_man wrote:I was just removing the valves from a z900 head and found an additional shim under each of the lower valve spring seats. The shims are all stamped VSI and 203. Please see photos of the item below. Can anyone lets me know anything about these items as they don't appear to be listed in the parts manual.
valve spring seat_1.jpg
valve spring seat_2.jpg


There used for setting your valve spring height after your seats have been cut.


+1

Re: Z900 Valves

Posted: Fri Jun 15, 2018 10:52 pm
Author: kawasaki_man
Thanks for your help Johny & z1bman.