Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

z1000 a1 mikuni carb adjuster

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Message
Author
777 EMU
new poster
Posts: 4
Joined: 1st Jul 2018
Location: southport

z1000 a1 mikuni carb adjuster

#1 PostAuthor: 777 EMU » Sat Jul 07, 2018 7:50 pm

hi
just got my 1977 z1000 a1 an upon trying to adjust the carbs with morgan carb balancer two of the screw adjusters at the top of the slides are damaged,the screw slot is worn and i cant properly adjust them.
does any one know either part number or supplier of replacements ,all my searches have proved fruitless
thanks
john

User avatar
warren3200gt
ZedHead
ZedHead
Posts: 1028
Joined: 13th Jun 2014
Location: Dartford Kent

Re: z1000 a1 mikuni carb adjuster

#2 PostAuthor: warren3200gt » Sat Jul 07, 2018 8:02 pm

You could give allens performance a ring, all they do is carb and fuel line parts.
http://www.allensperformance.co.uk/shop/
PUM 488 June 20
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, 89 ZXR750H1

777 EMU
new poster
Posts: 4
Joined: 1st Jul 2018
Location: southport

Re: z1000 a1 mikuni carb adjuster

#3 PostAuthor: 777 EMU » Sun Jul 08, 2018 10:45 am

thanks for quick response :D , will give them a try

User avatar
z1bman
Hardcore
Hardcore
Posts: 4182
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

Re: z1000 a1 mikuni carb adjuster

#4 PostAuthor: z1bman » Sun Jul 08, 2018 12:16 pm

try john browse in wrexham

User avatar
ZedHead
Hardcore
Hardcore
Posts: 2328
Joined: 9th May 2009
Location: Darlington
Contact:

Re: z1000 a1 mikuni carb adjuster

#5 PostAuthor: ZedHead » Mon Jul 09, 2018 12:03 pm

z1bman wrote:try john browse in wrexham


+1

Part number is 16046-012. There are a few from the states on ebay for stupid money.

kev edwards
Hardcore
Hardcore
Posts: 1499
Joined: 3rd Apr 2009
Location: leverington UK

Re: z1000 a1 mikuni carb adjuster

#6 PostAuthor: kev edwards » Tue Jul 10, 2018 7:17 pm

This has happened quite a bit, on one set i had i cut the slot deeper and made the screwdriver narrower to enable me to do the job, worked fine not perfect, but you never see them unless making adjustments.


Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 25 guests