mikuni carbs
i was wondering should i lubricate the Throttle Valve Bracket , the rose joint ball.
i have striped the mikuni carbs and sonic cleaned them but didn't clean the bracket and ball joint as i wasn't sure about lubricating the joint.
i have managed to source a replacement adjuster and referbed the other damaged one thanks to all on my previous post.
not sure that i should add this to it or post new?
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Carb rebuild Z1000 A1 Lubrication?
Moderators: chrisu, paul doran, Taffus, KeithZ1R
- 8 Valve Mark
- Custard Cream
- Posts: 966
- Joined: 3rd Nov 2016
- Location: Glasgow, tropical west Scotland
Re: Carb rebuild Z1000 A1 Lubrication?
go for it, light grease, gt85, wd40 vaseline etc will do. any moving parts will always benefit from a friction reduction.. just ask anyone in the blue oyster bar!!
Who is online
Users browsing this forum: Peteypops23 and 89 guests