Guys, Been given a set of Very clean VM 26's to try and save. PO has had a go at removing the airscrew and totally buggered it.
Any idea's on how to remove whats left? It's soaking in penetrating fluid at the moment.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Save a set of VM26ss airscrew
Moderators: paul doran, Taffus, KeithZ1R, chrisu
- warren3200gt
- Hardcore
- Posts: 2731
- Joined: 13th Jun 2014
- Location: Dartford Kent
Save a set of VM26ss airscrew
- Attachments
-
- 20180808_135601[1].jpg (158.56 KiB) Viewed 1998 times
PUM 488 June 2023
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
Re: Save a set of VM26ss airscrew
He's made a right ball's of that
Everything needs keeping aligned to the seat so I would take it to a machine shop and get them to set it up on a miller. If you try to drill it out the drill will snatch or run off into the ally, which is softer, and make it worse. Don't be tempted to use an "easy out" they are the work of Beelzebub, and should be thrown in the nearest river. I run a machine shop, and have had 30 years of peep's saying "my mate said he could easy get it out"
Hopefully it's still salvageable..............
If you get stuck drop me a PM
Everything needs keeping aligned to the seat so I would take it to a machine shop and get them to set it up on a miller. If you try to drill it out the drill will snatch or run off into the ally, which is softer, and make it worse. Don't be tempted to use an "easy out" they are the work of Beelzebub, and should be thrown in the nearest river. I run a machine shop, and have had 30 years of peep's saying "my mate said he could easy get it out"
Hopefully it's still salvageable..............
If you get stuck drop me a PM
- warren3200gt
- Hardcore
- Posts: 2731
- Joined: 13th Jun 2014
- Location: Dartford Kent
Re: Save a set of VM26ss airscrew
Thanks for the offer but I've sorted it now. Just a bit scary doing it. Was hoping for an easy answer but bit the bullet.
Answer, Use the smallest milling piece I have put it in a Dremel and cut a slot and use a small impact driver.
Answer, Use the smallest milling piece I have put it in a Dremel and cut a slot and use a small impact driver.
PUM 488 June 2023
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
Re: Save a set of VM26ss airscrew
Wow ! Well done on sorting that one
Why do I persist in debating with idiots ? I really should know better
- warren3200gt
- Hardcore
- Posts: 2731
- Joined: 13th Jun 2014
- Location: Dartford Kent
Re: Save a set of VM26ss airscrew
Saved and cleaned to within an inch of their lives, now what to do with them. Leaning towards a mahogany stand and using as a paper weight
- Attachments
-
- 20180808_171847.jpg (134.47 KiB) Viewed 1969 times
-
- 20180808_171608.jpg (108.82 KiB) Viewed 1969 times
PUM 488 June 2023
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
Who is online
Users browsing this forum: No registered users and 141 guests