Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000-A1 Main Loom routing?
Moderators: paul doran, Taffus, KeithZ1R, chrisu
- DogsbolloxofZ1B
- Hardcore
- Posts: 1440
- Joined: 28th Feb 2006
- Location: Near Chichester
Z1000-A1 Main Loom routing?
Would someone mind taking an image and show me how the main wiring loom routes from the Brown plug up behind the battery box. I've done what I think should be correct but seems a tad tight.
Re: Z1000-A1 Main Loom routing?
Mike. From memory the loom has to go between the air box and frame under the forward and upper side panel fixing. The only annoying thing is you may have to remove or at least move the air box to move it there.
Asphalt Cowboy Z1100R, 1981 Z1000J
-
- ZedHead
- Posts: 1128
- Joined: 11th Sep 2012
- Location: Reading
- Contact:
Re: Z1000-A1 Main Loom routing?
Funnily enough, although you'd think it went behind the frame, it doesn't.
This is a pic of an unrestored 900A4, but Z1000A1 and A2s are the same - the side panel hides it.
This is a pic of an unrestored 900A4, but Z1000A1 and A2s are the same - the side panel hides it.
Cheers,
Mark.
Mark.
Who is online
Users browsing this forum: Skid Mark and 167 guests