Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Z1000A1 REAR CALIPER

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Message
Author
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3232
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

Z1000A1 REAR CALIPER

#1 PostAuthor: PAULJAC47 » Thu Oct 11, 2018 7:10 pm

Guyz ,Looking for some dimensions if anyone has a z thou a1 or a2 caliper in bits,need piston dimensions diameter and length,gap between piston bores when pistons fully back,.....got a rotor here 7mm,new pads are 9mm apiece,disc rotor is dead central,thinking may have mismatch of bits,reckon would need to lose 3mm at the mo so brakes wouldnt bind..Ta Paul J
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo

You can't polish a turd, but you can roll it in glitter

Salad is what real food eats.
Anon

PUM 673

User avatar
ADRIAN H
Hardcore
Hardcore
Posts: 3386
Joined: 21st Mar 2009
Location: The Brunswick, Charminster. Bmth

Re: Z1000A1 REAR CALIPER

#2 PostAuthor: ADRIAN H » Thu Oct 11, 2018 7:52 pm

Have one in the garage, I am working away and won’t be home till late Saturday but can have a look Saturday evening or Sunday - if no one else can help out before then.
👀 👀 👀
email - adrianhorsfield@live.co.uk

User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3232
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

Re: Z1000A1 REAR CALIPER

#3 PostAuthor: PAULJAC47 » Thu Oct 11, 2018 8:17 pm

Thanks Adrian
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."

-Han Solo



You can't polish a turd, but you can roll it in glitter



Salad is what real food eats.

Anon



PUM 673

User avatar
ADRIAN H
Hardcore
Hardcore
Posts: 3386
Joined: 21st Mar 2009
Location: The Brunswick, Charminster. Bmth

Re: Z1000A1 REAR CALIPER

#4 PostAuthor: ADRIAN H » Mon Oct 15, 2018 6:09 pm

Diameter 42.74mm
Depth 22.75mm
Distance between retracted pistons 22.6mm
Attachments
804B0B12-F6A5-426D-B2F4-EFA2E52F123A.jpeg
0DE6DEFA-CD18-4F94-93C8-C5CD8B9116D2.jpeg
267F460C-0CFC-4943-BD92-1E40AAB558F3.jpeg
👀 👀 👀

email - adrianhorsfield@live.co.uk

User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3232
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

Re: Z1000A1 REAR CALIPER

#5 PostAuthor: PAULJAC47 » Mon Oct 15, 2018 6:40 pm

Thats Great Adrian,explains why my set up is binding,my rotor is 7mm,new pads are supplied as 9mm or 8mm a piece plus 1mm for the anti rattle shims,that makes 7+8+8+1=24 at the best some pads are 7+9+9+1=26,both way over 22.6 as you state,whats the thickness of your rotor? are your pads thinner than 8mm?..Many Thanks Paul J
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."

-Han Solo



You can't polish a turd, but you can roll it in glitter



Salad is what real food eats.

Anon



PUM 673

User avatar
ADRIAN H
Hardcore
Hardcore
Posts: 3386
Joined: 21st Mar 2009
Location: The Brunswick, Charminster. Bmth

Re: Z1000A1 REAR CALIPER

#6 PostAuthor: ADRIAN H » Mon Oct 15, 2018 7:52 pm

The disc is 7mm will check the pads pretty sure I couldn’t use the anti rattle shims and had to file down the pads to get them to fit.
Will check pad thickness tomorrow.
👀 👀 👀

email - adrianhorsfield@live.co.uk


Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 24 guests