Hi all.
Quick dumb question - can anyone confirm the size of main and vacuum fuel hoses for a GPZ750 to Mikuni BS34CV Carbs? I think it's ID 8mm and 4mm? Brands recommended?
Also wouldn't mind a heads up on the vacuum layout for this carb. Basically putting a rebuilt carb on a new engine for the first time and despite lots of Googling there's no info on the vacuum layout - I could probably figure it by looking at it but wouldn't mind a pro-tip so I don't leave anything unconnected or not blanking anything that should be blanked.
Cheers.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Fuel Hosing
Moderators: chrisu, paul doran, Taffus, KeithZ1R
-
warren3200gt
- Hardcore
- Posts: 2719
- Joined: 13th Jun 2014
- Location: Dartford Kent
Re: Fuel Hosing
Don't know about your vacuum system question but I get all my tubing from https://www.advancedfluidsolutions.co.u ... r-90-c.asp nitrile is what you want.
PUM 488 June 2023
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
Who is online
Users browsing this forum: rpeters and 68 guests