Evening Gents
Before I go all Blue Peter does anybody have a quick solution to blocking of the injector ports in the cylinder head or a template / method I could use?
Cheers Amigos
Gus
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
GPZ1100 Cylinder head blank off plates
Moderators: chrisu, paul doran, Taffus, KeithZ1R
GPZ1100 Cylinder head blank off plates
"Set the GRINDER on it"
Re: GPZ1100 Cylinder head blank off plates
APE make these. - http://kzzone.com/billet.html
Debben performance or Grumpy1260 should be able to get you some.
Debben performance or Grumpy1260 should be able to get you some.
adrianhorsfield@live.co.uk
Sunny Bournemouth. Dorset. UK.
Sunny Bournemouth. Dorset. UK.
Re: GPZ1100 Cylinder head blank off plates
Hi Adrian
Thanks for the reply.
They're the ones for the emmission caps on the cam covers.
I need something for where the injectors bolt into the inlet tract on the cyl. head.
Cheers
Gus
Thanks for the reply.
They're the ones for the emmission caps on the cam covers.
I need something for where the injectors bolt into the inlet tract on the cyl. head.
Cheers
Gus
"Set the GRINDER on it"
Re: GPZ1100 Cylinder head blank off plates
Unlikely they will be the correct hole centres but a bit of fettling might get it.
https://www.ebay.co.uk/itm/Classic-Mini ... rk:13:pf:0
Same seller
https://www.ebay.co.uk/itm/CLASSIC-MINI ... SwDYxbuL-j
And again
https://www.ebay.co.uk/itm/Classic-Aust ... Sw0RlbuL59
AL
https://www.ebay.co.uk/itm/Classic-Mini ... rk:13:pf:0
Same seller
https://www.ebay.co.uk/itm/CLASSIC-MINI ... SwDYxbuL-j
And again
https://www.ebay.co.uk/itm/Classic-Aust ... Sw0RlbuL59
AL
1981 J1
Re: GPZ1100 Cylinder head blank off plates
Thanks Al.
Gotta be worth asking them some questions.
Gus
Gotta be worth asking them some questions.
Gus
"Set the GRINDER on it"
Re: GPZ1100 Cylinder head blank off plates
Hi Gus,
I think I have some that i have removed from H heads recently (unless I binned them!), I will take a look.
Do you have the rubber seals from the bores?
Rob
I think I have some that i have removed from H heads recently (unless I binned them!), I will take a look.
Do you have the rubber seals from the bores?
Rob
paid up member
Re: GPZ1100 Cylinder head blank off plates
Hi Rob
Thanks for the reply.
No I don't have rubbers either, I was looking if I could use "O" rings but the recess is too deep.
Cheers
Gus
Thanks for the reply.
No I don't have rubbers either, I was looking if I could use "O" rings but the recess is too deep.
Cheers
Gus
"Set the GRINDER on it"
Re: GPZ1100 Cylinder head blank off plates
What’s your mobile gus?..
Or call me on 07920 422205.
I have the plugs
Or call me on 07920 422205.
I have the plugs
paid up member
Who is online
Users browsing this forum: No registered users and 152 guests