GPZ1100 Cylinder head blank off plates

[Gus]

Evening Gents

Before I go all Blue Peter does anybody have a quick solution to blocking of the injector ports in the cylinder head or a template / method I could use?

Cheers Amigos

Gus

[ADRIAN H]

APE make these. - http://kzzone.com/billet.html

Debben performance or Grumpy1260 should be able to get you some.

[Gus]

Hi Adrian

Thanks for the reply.

They're the ones for the emmission caps on the cam covers.

I need something for where the injectors bolt into the inlet tract on the cyl. head.

Cheers

Gus

[Gus]

[Al]

Unlikely they will be the correct hole centres but a bit of fettling might get it.

https://www.ebay.co.uk/itm/Classic-Mini ... rk:13:pf:0

Same seller
https://www.ebay.co.uk/itm/CLASSIC-MINI ... SwDYxbuL-j

And again
https://www.ebay.co.uk/itm/Classic-Aust ... Sw0RlbuL59

AL

[Gus]

Thanks Al.

Gotta be worth asking them some questions.

Gus

[rpeters]

Hi Gus,

I think I have some that i have removed from H heads recently (unless I binned them!), I will take a look.

Do you have the rubber seals from the bores?

Rob

[Gus]

Hi Rob

Thanks for the reply.

No I don't have rubbers either, I was looking if I could use "O" rings but the recess is too deep.

Cheers

Gus

[rpeters]

What’s your mobile gus?..
Or call me on 07920 422205.
I have the plugs