Page 1 of 1
GPZ1100 Cylinder head blank off plates
Posted: Wed Oct 24, 2018 5:06 pm
Author: Gus
Evening Gents
Before I go all Blue Peter does anybody have a quick solution to blocking of the injector ports in the cylinder head or a template / method I could use?
Cheers Amigos
Gus
Re: GPZ1100 Cylinder head blank off plates
Posted: Wed Oct 24, 2018 6:41 pm
Author: ADRIAN H
APE make these. -
http://kzzone.com/billet.html Debben performance or Grumpy1260 should be able to get you some.
Re: GPZ1100 Cylinder head blank off plates
Posted: Wed Oct 24, 2018 6:44 pm
Author: Gus
Hi Adrian
Thanks for the reply.
They're the ones for the emmission caps on the cam covers.
I need something for where the injectors bolt into the inlet tract on the cyl. head.
Cheers
Gus
Re: GPZ1100 Cylinder head blank off plates
Posted: Wed Oct 24, 2018 6:51 pm
Author: Gus
Re: GPZ1100 Cylinder head blank off plates
Posted: Wed Oct 24, 2018 7:10 pm
Author: Al
Re: GPZ1100 Cylinder head blank off plates
Posted: Wed Oct 24, 2018 7:17 pm
Author: Gus
Thanks Al.
Gotta be worth asking them some questions.
Gus
Re: GPZ1100 Cylinder head blank off plates
Posted: Thu Oct 25, 2018 6:25 am
Author: rpeters
Hi Gus,
I think I have some that i have removed from H heads recently (unless I binned them!), I will take a look.
Do you have the rubber seals from the bores?
Rob
Re: GPZ1100 Cylinder head blank off plates
Posted: Thu Oct 25, 2018 8:10 am
Author: Gus
Hi Rob
Thanks for the reply.
No I don't have rubbers either, I was looking if I could use "O" rings but the recess is too deep.
Cheers
Gus
Re: GPZ1100 Cylinder head blank off plates
Posted: Sat Oct 27, 2018 3:29 pm
Author: rpeters
What’s your mobile gus?..
Or call me on 07920 422205.
I have the plugs