Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Camshaft degeeing
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Camshaft degeeing
Hello ...can anyone point me in the direction of a step by step guide to degreeing in camshafts on a Z1 please
- Ginger Bear
- Hardcore
- Posts: 5512
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
Re: Camshaft degeeing
One of the easiest (for me) set of instructions to follow came from Joe Hooper. I'll see if I can find them and scan them for you.
Re: Camshaft degeeing
Just take it steady - needs alternator cover off too!
And on the 7th day... Zeds were created!
Re: Camshaft degeeing
Plenty of "how to tutorials" on the net if you do a google search.
Some are more clearer than others.
Here's a couple that should be clear enough.
https://sites.google.com/site/suzukitec ... -camshafts
http://www.webcamshafts.com/mobile/degreeing.html
Some are more clearer than others.
Here's a couple that should be clear enough.
https://sites.google.com/site/suzukitec ... -camshafts
http://www.webcamshafts.com/mobile/degreeing.html
Re: Camshaft degeeing
Thanks for that ..all very interesting and I think i will be able to do it
Just one question ..... in the first magazine article they say set the valve clearances and in the 2 links they say remove all valve lash ...... do they mean excess lash or set the valve clearance to zero ?
Just one question ..... in the first magazine article they say set the valve clearances and in the 2 links they say remove all valve lash ...... do they mean excess lash or set the valve clearance to zero ?
Re: Camshaft degeeing
chrisw1 wrote:Thanks for that ..all very interesting and I think i will be able to do it
Just one question ..... in the first magazine article they say set the valve clearances and in the 2 links they say remove all valve lash ...... do they mean excess lash or set the valve clearance to zero ?
You can use whatever lash you want or even negative clearance, the maths will always give the same results .
I set the clearance at what the engine will be run at.
When done you want to run 0.15mm .
Re: Camshaft degeeing
Thanks again ..ok Im up to speed ...just need my pistons to arrive and i will get stuck in
Who is online
Users browsing this forum: No registered users and 65 guests