Page 1 of 1
z1 cams
Posted: Fri Nov 30, 2018 11:33 pm
Author: ogre
hi all fitted new valve guides and had valves cut and relapped in and i've come to check valve clearances and noticed my cams are andrews.going back to standard bore and pistons can these be used or is it best to use standard cams.
cheers ogre
Re: z1 cams
Posted: Mon Dec 03, 2018 10:14 am
Author: ogre
hi all just checked cams says x2 on the end don't wanna build it up to find that these are only good for big bore engines some help would be appreciated.
cheers
Re: z1 cams
Posted: Mon Dec 03, 2018 11:06 am
Author: zed1015
Specs for the Andrews X2 cams are in the link below..
They are fairly mild, no need for a big bore and will run with stock valve springs.
http://www.andrewsproducts.com/files/assets/KZ900-1.pdf
Re: z1 cams
Posted: Mon Dec 03, 2018 11:10 am
Author: Ultim8pc
I have a set of X2 cams. Bought them because they are a mild street cam, you shouldn't have any issues with them in a non-tuned bike.
Re: z1 cams
Posted: Mon Dec 03, 2018 12:43 pm
Author: ogre
thats great thanks
Re: z1 cams
Posted: Mon Dec 03, 2018 4:03 pm
Author: Keefleaf
Got 2X in one of my Zeds
work well