Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000 A2 Speedo cable
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Z1000 A2 Speedo cable
Wheres the best place to buy a decent cable , the ones advertised on e bay are the wrong size wheel end , and the one i bought from an internet multi classic parts supplier , lasted half a mile , before squeeking and then braking
Re: Z1000 A2 Speedo cable
I have an A2 for over 5 years now
I have not bought a speedo cable but I have replaced the push / pull accelerator cables from Wemoto - quality seems good.
You have to be careful with the A2 cables as the uk bars are lower than other models
If in doubt talk to ZPower - I have used since 1986 - extremely knowledgeable and very helpful.
Z1 Enterprises in the USA are also good.
There are lots of other suppliers, but these are my main ones.
I have not bought a speedo cable but I have replaced the push / pull accelerator cables from Wemoto - quality seems good.
You have to be careful with the A2 cables as the uk bars are lower than other models
If in doubt talk to ZPower - I have used since 1986 - extremely knowledgeable and very helpful.
Z1 Enterprises in the USA are also good.
There are lots of other suppliers, but these are my main ones.
010
Re: Z1000 A2 Speedo cable
Kev , Mines a Kz with higher bars , After the fiasco with them e bay ones and the wrong fitment wheel end , i did buy the one that broke from wemoto , it lasted a mile . Thanks for info , i will contact Phil at z power . i dont think i have put the drive in wrong ? and is where it should be , and it would have broke straight away if not geared
-
- Custard Cream
- Posts: 910
- Joined: 31st Mar 2014
- Location: Runcorn
Re: Z1000 A2 Speedo cable
Just buy genuine Kawasaki cables?
-
- Hardcore
- Posts: 2051
- Joined: 3rd Apr 2009
- Location: leverington UK
Re: Z1000 A2 Speedo cable
Speedo cable is not affected by handlebar height.
Re: Z1000 A2 Speedo cable
kev edwards wrote:Speedo cable is not affected by handlebar height.
Correct. The length difference on A2 is due to re positioning the caliper behind the fork. Correct length is 94cm
-
- Hardcore
- Posts: 2051
- Joined: 3rd Apr 2009
- Location: leverington UK
Re: Z1000 A2 Speedo cable
ZedHead wrote:kev edwards wrote:Speedo cable is not affected by handlebar height.
Correct. The length difference on A2 is due to re positioning the caliper behind the fork. Correct length is 94cm
Correct.
Who is online
Users browsing this forum: MikeP and 74 guests