Page 1 of 1
MKII Carb question
Posted: Wed Dec 26, 2018 4:32 pm
Author: njwmct
Can any one tell me the thread size of the float bowel drain screws fitted to the Mikuni VM28SS carbs ?
i.e the carbs fitted to both Z1000 MKII & Z1R.
Cheers,
Nick
Re: MKII Carb question
Posted: Wed Dec 26, 2018 5:29 pm
Author: Philippe
Hi Nick
I don't know the size but they're the same as all the others (Z1A, Z1B, Z900A4, Z1000A1, Z1000A2, Z1R,...)Alltough some have drain holes and others don't.
You can buy them seperately with the O-ring at Z-Power.
GrtZ
Philippe
Re: MKII Carb question
Posted: Wed Dec 26, 2018 5:36 pm
Author: Gus
Quick guess M4
Sorry didn't read the drain screw part.
Re: MKII Carb question
Posted: Wed Dec 26, 2018 9:15 pm
Author: kev edwards
They are a fine thread m6, i have just looked.
Re: MKII Carb question
Posted: Thu Dec 27, 2018 1:05 pm
Author: njwmct
Thanks guys that's very helpful.
I want to get some adapters made up so that I can set all the service fuel levels at the same time - unless someone knows where I can buy them?
Re: MKII Carb question
Posted: Thu Dec 27, 2018 2:58 pm
Author: Philippe
Take a look at "classickawaparts" in Holland. Willem sells the adapters. I have one myself and it works great!
https://www.classickawaparts.nl/grote_h ... _meter.htmWillem understands English, so go for it!
GrtZ
Philippe
Re: MKII Carb question
Posted: Thu Dec 27, 2018 5:00 pm
Author: njwmct
Thanks Philippe
Re: MKII Carb question
Posted: Thu Dec 27, 2018 5:20 pm
Author: Philippe
You're welcome !
GrtZ
Philippe