Hi
Does anyone know if you can still get the pin terminals, that are used on the multi coloured panel connectors on a Z1000 A1
Cheers
Stuart
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Pin terminals for multi connectors
Moderators: paul doran, Taffus, KeithZ1R, chrisu
-
- Regular Poster
- Posts: 27
- Joined: 23rd Aug 2018
- Location: Old Warden, Bedfordshire
Re: Pin terminals for multi connectors
not sure but try vehicle wiring products nottingham they would be my first point of call.
-
- Regular Poster
- Posts: 27
- Joined: 23rd Aug 2018
- Location: Old Warden, Bedfordshire
Re: Pin terminals for multi connectors
Cheers will do !
Re: Pin terminals for multi connectors
No, they don't, best way is to find an old one and reuse.
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R
Re: Pin terminals for multi connectors
wurth do them
Re: Pin terminals for multi connectors
You wouldnt happen to have a link by any chance Z1bman??
Re: Pin terminals for multi connectors
there is a trade centre near you in Portsmouth take a sample of the ones you want as their catalogue is huge
Würth UK Ltd.
Trade store Portsmouth
Unit 3, Ameiva Point Quartremaine Road
PO3 5QP Portsmouth, Hampshire
0239 266 3251
0239 266 2516
portsmouth@wurth.co.uk
Würth UK Ltd.
Trade store Portsmouth
Unit 3, Ameiva Point Quartremaine Road
PO3 5QP Portsmouth, Hampshire
0239 266 3251
0239 266 2516
portsmouth@wurth.co.uk
Re: Pin terminals for multi connectors
Thank you!!
Re: Pin terminals for multi connectors
i found these i don't know if they are the correct size though
https://www.autosparks.co.uk/electrical ... other.html
https://www.autosparks.co.uk/electrical ... other.html
Re: Pin terminals for multi connectors
Looks good. I might order a few and compare them. I'll be going to Wurth tomorrow to have a look.
Re: Pin terminals for multi connectors
i did have a full kit of these terminals & the removal tools but my son knocked a gallon tin of thinners over in the garage & it spilt over the plastic case & melted
the plastic all over the terminals
the plastic all over the terminals
Who is online
Users browsing this forum: No registered users and 146 guests