Guys
anyone ever changed the seals head on ? I am talking about as in car engines etc with a length of rope in the bore ?
is it possible on a Z ?
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000 a1 Valve stem seals head on
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Re: Z1000 a1 Valve stem seals head on
Can be done as you say - but fiddly, so probably better to bite the bullet & give her a good decoke & check whilst you're at it.
And on the 7th day... Zeds were created!
- warren3200gt
- Hardcore
- Posts: 2728
- Joined: 13th Jun 2014
- Location: Dartford Kent
Re: Z1000 a1 Valve stem seals head on
How would you compess the valve spring to release the colletts?
PUM 488 June 2023
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
Re: Z1000 a1 Valve stem seals head on
warren3200gt wrote:How would you compess the valve spring to release the colletts?
You use a compressor that bolts to the top of the head.
Valve can also be kept from dropping by using compressed air instead of rope.
- warren3200gt
- Hardcore
- Posts: 2728
- Joined: 13th Jun 2014
- Location: Dartford Kent
Re: Z1000 a1 Valve stem seals head on
zed1015 wrote:warren3200gt wrote:How would you compess the valve spring to release the colletts?
You use a compressor that bolts to the top of the head.
Valve can also be kept from dropping by using compressed air instead of rope.
Hmm, not seen one of those, always used the G clampy shaped ones. So head off.
PUM 488 June 2023
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
- warren3200gt
- Hardcore
- Posts: 2728
- Joined: 13th Jun 2014
- Location: Dartford Kent
Re: Z1000 a1 Valve stem seals head on
So your supposed to bolt it to the cam caps or the cam cover ?
PUM 488 June 2023
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
Who is online
Users browsing this forum: No registered users and 146 guests