Does anyone know the location of the part no. on the mk2 seat pan, I was told awhile ago by the previous owner that he had bought a Z1000ST seat by mistake, this seat came with the bike when I brought it home.
Today I thought give it a clean up and put it on eBay, while cleaning the pan I noticed the info sticker and although the part that states the model type has some damage still visible are the letters A3A and apart from the emission info part number everything is the same
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Mk2 seat part number location
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Mk2 seat part number location
Z1000 MK2
Z1300 DFI
Z1300 DFI
Re: Mk2 seat part number location
Hi Gavin
show us some pictures please.
GrtZ
Philippe
show us some pictures please.
GrtZ
Philippe
the differences between a little boy and an adult man is the price and size of their toys!
Re: Mk2 seat part number location
Morning Phillippe
I hope these pics are enough to identify the seat. As can be seen it has no brackets so has not been put on to see if it fits
I hope these pics are enough to identify the seat. As can be seen it has no brackets so has not been put on to see if it fits
Z1000 MK2
Z1300 DFI
Z1300 DFI
Re: Mk2 seat part number location
Phillippe
I have just seen the pics you posted on the differences between the ST and the MK2 (wish I had looked earlier ), and the seat I have has the 3 holes for the rear seat hinge,
I have just seen the pics you posted on the differences between the ST and the MK2 (wish I had looked earlier ), and the seat I have has the 3 holes for the rear seat hinge,
Z1000 MK2
Z1300 DFI
Z1300 DFI
Re: Mk2 seat part number location
Hi Gavin
the one you have is a MK2 seat pan.
The distance between the centre of the first bolt hole of the front hinge and the centre of the last bolt of the rear seat hinge is approx 275 mm.
The distance between the centre of two seat rubbers on either side (from left to right hand side) of the seat pan is 185 mm. If you have the seat hinges and the lock bracket it's complete.
A hard to find object, are you sure you're going to put it on ebay?
GrtZ
Philippe
the one you have is a MK2 seat pan.
The distance between the centre of the first bolt hole of the front hinge and the centre of the last bolt of the rear seat hinge is approx 275 mm.
The distance between the centre of two seat rubbers on either side (from left to right hand side) of the seat pan is 185 mm. If you have the seat hinges and the lock bracket it's complete.
A hard to find object, are you sure you're going to put it on ebay?
GrtZ
Philippe
the differences between a little boy and an adult man is the price and size of their toys!
- 8 Valve Mark
- Custard Cream
- Posts: 966
- Joined: 3rd Nov 2016
- Location: Glasgow, tropical west Scotland
Re: Mk2 seat part number location
hi gavin, i think swirl is looking for a mk2 seat for his H project.. m
Re: Mk2 seat part number location
Thanks Phillippe
Not sure I need 2 seats as the one on the bike is in better condition, I just need to think about how much it is worth, the pics are as much as I have, no brackets etc.
Not sure I need 2 seats as the one on the bike is in better condition, I just need to think about how much it is worth, the pics are as much as I have, no brackets etc.
Z1000 MK2
Z1300 DFI
Z1300 DFI
Re: Mk2 seat part number location
Hi Gavin
then it's up to you to decide if and how much...
GrtZ
Philippe
then it's up to you to decide if and how much...
GrtZ
Philippe
the differences between a little boy and an adult man is the price and size of their toys!
Re: Mk2 seat part number location
8 Valve Mark wrote:hi gavin, i think swirl is looking for a mk2 seat for his H project.. m
I would be surprised if the MK2 seat fitted 1000H as the tank is bigger, not that I have tried
Z900A4, Z1000A1, Z1000ST E1,E2, Z1000Mk2 A3,Z1000H Z1R D1, z1000j3, Z1000P. Z900RS SE,
Z1300 A1,
GPZ1100 Unitrack, GPZ750E, GPZ 750Turbo, GPZ900r A1, A2, A6
ZZR1100 Purple and orange
KE175b, KE175F
along with some lesser makes
Z1300 A1,
GPZ1100 Unitrack, GPZ750E, GPZ 750Turbo, GPZ900r A1, A2, A6
ZZR1100 Purple and orange
KE175b, KE175F
along with some lesser makes
-
- ZedHead
- Posts: 1128
- Joined: 11th Sep 2012
- Location: Reading
- Contact:
Re: Mk2 seat part number location
hartyb wrote:8 Valve Mark wrote:hi gavin, i think swirl is looking for a mk2 seat for his H project.. m
I would be surprised if the MK2 seat fitted 1000H as the tank is bigger, not that I have tried
Well! I never knew that, having had both I would have said apart from fuel take-offs they were identical, and the seat would be interchangeable, but I will chew popcorn and watch this....
Cheers,
Mark.
Mark.
Re: Mk2 seat part number location
needaz1100r wrote:hartyb wrote:8 Valve Mark wrote:hi gavin, i think swirl is looking for a mk2 seat for his H project.. m
I would be surprised if the MK2 seat fitted 1000H as the tank is bigger, not that I have tried
Well! I never knew that, having had both I would have said apart from fuel take-offs they were identical, and the seat would be interchangeable, but I will chew popcorn and watch this....
I can understand the ST being different. But MkIi and H different- beggars belief.
adrianhorsfield@live.co.uk
Sunny Bournemouth. Dorset. UK.
Sunny Bournemouth. Dorset. UK.
Who is online
Users browsing this forum: No registered users and 55 guests