Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Re Z1000a1 needles in an Z1000 A2
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Re Z1000a1 needles in an Z1000 A2
Is this a good swop , as the a2 ones are leaner
Re: Re Z1000a1 needles in an Z1000 A2
Hi Snowy
are you talking about the needle bearings of the swing arm?
They're the same , the only difference is that the A1 swing arm has only place for one on each side and the A2 swing arm has two on each side.
GrtZ
Philippe
are you talking about the needle bearings of the swing arm?
They're the same , the only difference is that the A1 swing arm has only place for one on each side and the A2 swing arm has two on each side.
GrtZ
Philippe
the differences between a little boy and an adult man is the price and size of their toys!
Re: Re Z1000a1 needles in an Z1000 A2
Carbs ?
adrianhorsfield@live.co.uk
Sunny Bournemouth. Dorset. UK.
Sunny Bournemouth. Dorset. UK.
Re: Re Z1000a1 needles in an Z1000 A2
Sorry Guys , il be more specific , Yes carb main jet needles , speaking to z power , Kawasaki no longer sell , and twith the rebuild kits , the main jet needles are not coded,
- warren3200gt
- Hardcore
- Posts: 2729
- Joined: 13th Jun 2014
- Location: Dartford Kent
Re: Re Z1000a1 needles in an Z1000 A2
Have you tried allens performance. http://www.allensperformance.co.uk/shop/
PUM 488 June 2023
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
Re: Re Z1000a1 needles in an Z1000 A2
waiting on e mail , got pilots there
Re: Re Z1000a1 needles in an Z1000 A2
Cybike list 2 different full carb rebuild kits , but dont seem to sell jet needles separate
Re: Re Z1000a1 needles in an Z1000 A2
I might have a set of new and unused Keyster needles kicking about if that helps.
http://www.airevalleyclassics.co.uk
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
Re: Re Z1000a1 needles in an Z1000 A2
Thank you so much ultim , but think I will try to replace with mikunis, was the A2 ,s different jet needles for leaner running ?
Re: Re Z1000a1 needles in an Z1000 A2
snowyz9 wrote:Thank you so much ultim8 , but think I will try to replace with mikunis, was the A2's different jet needles for leaner running ?
No worries.
Not sure about why, but I would suspect it was all push towards less emissions and thus leaner running...
http://www.airevalleyclassics.co.uk
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
Re: Re Z1000a1 needles in an Z1000 A2
Thanks Ultim
Who is online
Users browsing this forum: No registered users and 223 guests