Page 1 of 1
Re Z1000a1 needles in an Z1000 A2
Posted: Thu Mar 07, 2019 2:18 pm
Author: snowyz9
Is this a good swop , as the a2 ones are leaner
Re: Re Z1000a1 needles in an Z1000 A2
Posted: Fri Mar 08, 2019 3:53 am
Author: Philippe
Hi Snowy
are you talking about the needle bearings of the swing arm?
They're the same , the only difference is that the A1 swing arm has only place for one on each side and the A2 swing arm has two on each side.
GrtZ
Philippe
Re: Re Z1000a1 needles in an Z1000 A2
Posted: Fri Mar 08, 2019 8:51 am
Author: ADRIAN H
Carbs ?
Re: Re Z1000a1 needles in an Z1000 A2
Posted: Fri Mar 08, 2019 2:28 pm
Author: snowyz9
Sorry Guys , il be more specific , Yes carb main jet needles , speaking to z power , Kawasaki no longer sell , and twith the rebuild kits , the main jet needles are not coded,
Re: Re Z1000a1 needles in an Z1000 A2
Posted: Fri Mar 08, 2019 2:55 pm
Author: warren3200gt
Re: Re Z1000a1 needles in an Z1000 A2
Posted: Sat Mar 09, 2019 9:16 am
Author: snowyz9
waiting on e mail , got pilots there
Re: Re Z1000a1 needles in an Z1000 A2
Posted: Sun Mar 10, 2019 10:38 am
Author: snowyz9
Cybike list 2 different full carb rebuild kits , but dont seem to sell jet needles separate
Re: Re Z1000a1 needles in an Z1000 A2
Posted: Mon Mar 11, 2019 8:47 am
Author: Ultim8pc
I might have a set of new and unused Keyster needles kicking about if that helps.
Re: Re Z1000a1 needles in an Z1000 A2
Posted: Mon Mar 11, 2019 11:25 pm
Author: snowyz9
Thank you so much ultim , but think I will try to replace with mikunis, was the A2 ,s different jet needles for leaner running ?
Re: Re Z1000a1 needles in an Z1000 A2
Posted: Tue Mar 12, 2019 10:08 am
Author: Ultim8pc
snowyz9 wrote:Thank you so much ultim8 , but think I will try to replace with mikunis, was the A2's different jet needles for leaner running ?
No worries.
Not sure about why, but I would suspect it was all push towards less emissions and thus leaner running...
Re: Re Z1000a1 needles in an Z1000 A2
Posted: Tue Mar 12, 2019 10:17 am
Author: snowyz9
Thanks Ultim