Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
jet needle z1000
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Re: jet needle z1000
Thanks , No power loss at all ,and biscuit before , but are A2 Carbs Better , than emissions type ? have just changed changed exhaust , from restrictive mega's , and was uprating carb jets and needles , when found different . Done shims , swopped to boyer and coils . Is the
Re: jet needle z1000
You could try 5CN19. Same 51mm length and taper but the taper start fractionally earlier
Re: jet needle z1000
I have found some earlier A2 Carbs Zedhead , i have some nos kawasaki 16009-074 needles , (rocking horse poo) A1 , would these be better than stock A2 items ?
Re: jet needle z1000
snowyz9 wrote:I have found some earlier A2 Carbs Zedhead , i have some nos kawasaki 16009-074 needles , (rocking horse poo) A1 , would these be better than stock A2 items ?
That part number cross references to 5CN8 as used on A1. No harm in trying but it is more trial and error than science.
Who is online
Users browsing this forum: No registered users and 95 guests