Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
carb to head rubbers
Moderators: paul doran, Taffus, KeithZ1R, chrisu
carb to head rubbers
Hi all, who sells the best, carb to head rubbers? there's loads on Ebay just looking for any good reports or recommendations of anyone, yep my carbs are off, the previous owner did the airbox to carb, but I guess not the fronts as the screws underneath are rusty, and are coming out as 41 year old fasteners, probably an easy job with engine out, thank f#~k for snap on screwdrive wrench and bit, can't swing the pin hammer to shock threads so tighten and reverse is the method I used, yep stainless going back in on allyslip to prevent the chemical reaction between A2 and Ally accelerated by heat off the head, I can't believe that some daft bike breakers on ebay are flogging second hand ones coz they're' Genwine'
More Smiles Per Mile
Re: carb to head rubbers
It depends, if genuine is all you trust then you have to pay the price.
Tourmax or PMC are also good quality made in Japan for less than a third of the price.
Tourmax or PMC are also good quality made in Japan for less than a third of the price.
Who is online
Users browsing this forum: Bing [Bot] and 152 guests