Z1OwnersClub GB

Hi all, who sells the best, carb to head rubbers? there's loads on Ebay just looking for any good reports or recommendations of anyone, yep my carbs are off, the previous owner did the airbox to carb, but I guess not the fronts as the screws underneath are rusty, and are coming out as 41 year old fasteners, probably an easy job with engine out, thank f#~k for snap on screwdrive wrench and bit, can't swing the pin hammer to shock threads so tighten and reverse is the method I used, yep stainless going back in on allyslip to prevent the chemical reaction between A2 and Ally accelerated by heat off the head, I can't believe that some daft bike breakers on ebay are flogging second hand ones coz they're' Genwine'

http://www.z-power.co.uk/z900-z1-z1a-z1 ... rb-to-head x 2

http://www.z-power.co.uk/z900-z1-z1a-z1 ... rb-to-head x 2

It depends, if genuine is all you trust then you have to pay the price.

Tourmax or PMC are also good quality made in Japan for less than a third of the price.