Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
swinging arm for z1000a1/a2
Moderators: paul doran, Taffus, KeithZ1R, chrisu
swinging arm for z1000a1/a2
I am looking at buying a z1000a1 standard swinging arm, does anyone know if the later z1000 a3/b3 swinging arm is the same as the a1/a2 ones?
Re: swinging arm for z1000a1/a2
Hi Bart
on the outside they're the same, on the inside it's another story.
The A1 swing arm has one needle bearing on each side, the A2 and A3 have two needles bearings on each side.
To the best of my knowledge, you can't put two needle bearings on one side in an A1 swing arm.
Somebody else might correct me if I'm wrong.
GrtZ
Philippe
on the outside they're the same, on the inside it's another story.
The A1 swing arm has one needle bearing on each side, the A2 and A3 have two needles bearings on each side.
To the best of my knowledge, you can't put two needle bearings on one side in an A1 swing arm.
Somebody else might correct me if I'm wrong.
GrtZ
Philippe
the differences between a little boy and an adult man is the price and size of their toys!
Who is online
Users browsing this forum: KeithZ1R and 191 guests