I have a 1976 Z900 A4. I have replaced the exhaust with a 4 into 4, Cleaned the carbs and installed Standard Jets.
A friend of mine was going to come around on Saturday to tune the Carbs using the gauges he uses on his Hodna, he has just told me that I need to reset the tappers before I tune the carbs?
Is this correct?
If it is correct is it Shims or tappets?
Thanks in advance.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Carb tuning and tappets
Moderators: chrisu, paul doran, Taffus, KeithZ1R
-
kev edwards
- Hardcore
- Posts: 2051
- Joined: 3rd Apr 2009
- Location: leverington UK
Re: Carb tuning and tappets
They are shims, and yes you need to check those, also cam chain tension, engine timing, a whole service really with the carb balancing last.
Re: Carb tuning and tappets
Oh Bugger, I’ll have to get that done somewhere then as it is beyond me.
Thank you for replying.
Derrick
Thank you for replying.
Derrick