Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
idle screws on 1100R
Moderators: chrisu, paul doran, Taffus, KeithZ1R
- paul doran
- Area Rep.
- Posts: 9141
- Joined: 24th Sep 2004
- Location: near Dublin Ireland
idle screws on 1100R
anyone know roughly how many turns out the idle screw should be on a Lawson 1100R
way too many Zeds
Re: idle screws on 1100R
3/4 turns out .
fer
fer
- paul doran
- Area Rep.
- Posts: 9141
- Joined: 24th Sep 2004
- Location: near Dublin Ireland
Re: idle screws on 1100R
thanks Fer
finally got the Lawson running again
four sets of carbs but not one would would work until the last set I got
finally got the Lawson running again
four sets of carbs but not one would would work until the last set I got
way too many Zeds
Re: idle screws on 1100R
My manual supplement , second edition 1 :May.4,1984 has the same panel with the same information but the pilot screw is 3/4 turns out . Is your supplement from a later date ?
fer
fer
Re: idle screws on 1100R
This copy is; Second Edition (4) Sept 1st 1988 (I).
The UK banned TEl lead in petrol in 2000, the USA in 1996, but Japan (perhaps the first) banned it in 1986.
Course it could just be a typo!
AL
The UK banned TEl lead in petrol in 2000, the USA in 1996, but Japan (perhaps the first) banned it in 1986.
Course it could just be a typo!
AL
1981 J1
Who is online
Users browsing this forum: Gray17 and 97 guests