Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Will this fit my Z1R
Moderators: chrisu, paul doran, Taffus, KeithZ1R
-
GreenMamba
- Regular Poster
- Posts: 44
- Joined: 5th Jun 2019
- Location: Ayr Scotland
Will this fit my Z1R
Hey guys I need your knowledge on this one. Long story short I damaged the end roller bearing on my crank yesterday and I need to replace it but the illustrations don't show bearings on the D1 crank will this fit in my crank and which one the 030 or the 063 type?
- Attachments
-
-
Re: Will this fit my Z1R
Can't help with the part numbers as i'm currently away from the workshop but the D1 crank takes the same bearings as all Z1, Z900, Z1000 through to Z1R D1.
The D2 , ST and MK2 all use the later "Square cam cover" motor that uses a beefier crank and slightly different bearings.
I suspect the bearings in your pic are one each of a crank main and a bigend.
The D2 , ST and MK2 all use the later "Square cam cover" motor that uses a beefier crank and slightly different bearings.
I suspect the bearings in your pic are one each of a crank main and a bigend.
Re: Will this fit my Z1R
92046-063 superseeds 92046-030 both the same but 063 is the newer part
Re: Will this fit my Z1R
z1bman wrote:92046-063 superseeds 92046-030 both the same but 063 is the newer part
listen to Paul
Keith
You can never have too many tools in your life, except the two legged variety
I'm never wrong, once I thought I was but I was
mistaken.
Phil Churchett winner 2013
You can never have too many tools in your life, except the two legged variety
I'm never wrong, once I thought I was but I was
mistaken.
Phil Churchett winner 2013
Who is online
Users browsing this forum: No registered users and 44 guests