Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000A1 Main jets with Kerker
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Z1000A1 Main jets with Kerker
With stock airbox and kerker 4 into 1 , what main jet are you using . plse
-
Mark Tiller
- Area Rep.
- Posts: 1292
- Joined: 12th Jun 2011
- Location: Amersham
Re: Z1000A1 Main jets with Kerker
What main are you on now.
Shouldn't need to go up more than one size with just a pipe change especially with the stock airbox.
May not even need to change it at all depending on the flow of the pipe.
Shouldn't need to go up more than one size with just a pipe change especially with the stock airbox.
May not even need to change it at all depending on the flow of the pipe.
Re: Z1000A1 Main jets with Kerker
Using 110
Re: Z1000A1 Main jets with Kerker
I recently read a topic on carbs from a US Z site. The chap who wrote it seemed to be well known and well respected. From what I remember he said the rule of thumb was: up one size for cone filters and the like, up two sizes for freer flowing aftermarket exhausts. That would put you at 115 with standard airbox.
Pete
Who is online
Users browsing this forum: Maunders and 73 guests