Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Neutral switch
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Neutral switch
Got a problem with my 650 project, the neutral switch does not connect with the drum, I have a new switch and that's the same, looks about 1mm short, what could be the problem, selector cap worn? Any tips?
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R
Re: Neutral switch
yes could be the end plate worn or damaged not a big job to get the sprocket cover off & have a look
Re: Neutral switch
Sorted thanks Paul, I did just what you suggested, then remembered I put a newer inside sprocket plate on because the old one had suffered a chain snap I think, had been welded up by the side of the neutral switch, anyway when I checked the plate it had been pushed in about 1.5mm, so I put it straight, all good now light works as it should , cheers.
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R
Who is online
Users browsing this forum: No registered users and 156 guests