Z1OwnersClub GB

Hi, does anyone know the part no. or the size of the o'ring between the reservoir and the body of the rear master cylinder on the MK2?
Thanks in advance.

Just a reminder for my previous question, any info greatly received, thanks

This is the Kawasaki diagram from CMSNL for an 1980 A4 Z1000. There appears not to be a separate part listed there.

AL

Thanks Al

Hi shorty
the O-ring is not sold seperately by Kawasaki.
You'll have to find one or make one yourself.
It's a square O-ring, the outer diameter is 52 mm, the height is 2,85 mm and it has a width of 2,35 mm
Don't forget it has to be brake fluid resistant!
Good luck
GrtZ
Philippe

Thanks Philippe, just what I needed.