Page 1 of 1
Washer Plate
Posted: Fri Aug 30, 2019 10:15 am
Author: Wayne1960
Is there anyone making these washers? don't think they are available anymore
Its the double tab washer that goes under the throttle slide adjuster on Mikuni VM 26s
Part number 16054-008
Re: Washer Plate
Posted: Fri Aug 30, 2019 11:00 am
Author: ZedHead
No longer available under that part number. I could get some laser cut in stainless from a sample if there is demand?
Re: Washer Plate
Posted: Fri Aug 30, 2019 11:24 am
Author: Gus
Re: Washer Plate
Posted: Fri Aug 30, 2019 12:33 pm
Author: MikeP
Re: Washer Plate
Posted: Fri Aug 30, 2019 1:29 pm
Author: Wayne1960
Managed to get some from CMS
Thanks
Re: Washer Plate
Posted: Sat Aug 31, 2019 12:27 am
Author: johny brando
Wayne1960 wrote:Is there anyone making these washers? don't think they are available anymore
Its the double tab washer that goes under the throttle slide adjuster on Mikuni VM 26s
Part number 16054-008
Hi Wayne, nip down your local hard wear shop & buy some thin sheet- tin or brass & make 8 up yourself .........it won't take long ! & it will cost less than buying them too. Cheers.
Re: Washer Plate
Posted: Sun Sep 01, 2019 7:52 am
Author: Wayne1960
Hi thanks for the info. Once i took them off and flattened them out they looked ok. They looked crap installed but look fine now.
