I have a loom and some other electrical cables from a z1 900 73 on which the black outer material has dried out and is breaking and rumbling away when I handle them. Does anyone know is it possible to have the loom recovered along with the other cables which are for the two handle bar switches and other cables. Is there some heat shrink material of the same kind black gloss in colour that i might be to get that would do the job. Has anyone has a problem like this before. Any help would be appreciated.
Thanks Irishkev
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Loom Outer Cover Material Crumbling Away
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Re: Loom Outer Cover Material Crumbling Away
Check out Vehicle Wiring Product Derbyshire, they do all you need
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R
Re: Loom Outer Cover Material Crumbling Away
2006 ZRX1200R
1982 Z400J project
ex owner of Z1100R
GXI 2752 are you out there?
1982 Z400J project
ex owner of Z1100R
GXI 2752 are you out there?
Who is online
Users browsing this forum: No registered users and 23 guests