Hi
I have a Z1 73 Black Fuel Tap with an unusual crack in the brass pipe.
In the attached pic you can see can see the length of the crack in the pipe.
My question is can the brass pipe be removed and replaced without damaging the Fuel Tap.
How can I remove the pipe and re install a new one and make sure it cannot be dislodge. How would you also secure the smaller plastic fuel filter on the reserve side of the Fuel Tap? Really would appreciate any help with this problem.
Thanks Irishkev
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Fuel Tap Black 73 Brass Fitting
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Re: Fuel Tap Black 73 Brass Fitting
the tube is only pressed in. warn the tap with a heat gun & gently pull it out . measure the pipe diameter & you can buy it in short lengths on e bay
Re: Fuel Tap Black 73 Brass Fitting
Thanks Z1bman
I will have a go at it tomorrow.
Regards
I will have a go at it tomorrow.
Regards
Who is online
Users browsing this forum: No registered users and 188 guests