Guys,
Decided to do the starter clutch on the GPZ1100 engined Harris and come across an issue.....I bought a starter clutch kit but the larger dowels are too long to fit in the housing. They measure 14.45mm long. The ones that came out appear to have been hand ground to around 13mm long. Any idea's?
Cheers
Dave
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
GPZ1100 Starter Clutch question
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Re: GPZ1100 Starter Clutch question
The correct length of the rollers is ~14.5mm ANADIITS
They are 15mm diameter.
AL
They are 15mm diameter.
AL
1981 J1
Re: GPZ1100 Starter Clutch question
is the surface plate fitted to the underside of the housing ?
Who is online
Users browsing this forum: No registered users and 137 guests