Hi Folks, I need a new multi layer steel head gasket for my Gpz1100 with 1170 big bore kit, where is the best (cheapest) place to buy one these days?
Thanks
Dave
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
gpz1100 MLS Cometic head gasket
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Re: gpz1100 MLS Cometic head gasket
Try Chris at Grumpy's he knows you so should give you a decent discount.
Re: gpz1100 MLS Cometic head gasket
Phil beat me to it. If he cant help there's Suzukiperformancespares, and Since Ray is supposed to have initiated this process, he might be worth a ring.
Dave do you know if they can be re-used? I have heard both a yes and a no to that question!!
AL
Dave do you know if they can be re-used? I have heard both a yes and a no to that question!!
AL
1981 J1
Re: gpz1100 MLS Cometic head gasket
Al. got mine from Ray Debben last time but can't remeber the cost.
-
- Custard Cream
- Posts: 804
- Joined: 20th Oct 2016
- Location: Ipswich
Re: gpz1100 MLS Cometic head gasket
Al wrote:Phil beat me to it. If he cant help there's Suzukiperformancespares, and Since Ray is supposed to have initiated this process, he might be worth a ring.
Dave do you know if they can be re-used? I have heard both a yes and a no to that question!!
AL
Chris says the multi layer metal gaskets can be reused.
My one cost about £70, which sounds a lot, but the genuine Kawasaki pair of gaskets are £35ish and can't be reused.
An expanding collection of parts pretending to be a Z1100R and a Yamaha FZ750
Re: gpz1100 MLS Cometic head gasket
You can re-use them if the Viton coating is intact but you still risk a higher chance of failure over a new one.
They also prefer a smoother machined block and head finish to what you can get away with a conventional fibre gasket so a pitted surface would benefit from a light skim to guarantee a perfect seal.
They also prefer a smoother machined block and head finish to what you can get away with a conventional fibre gasket so a pitted surface would benefit from a light skim to guarantee a perfect seal.
Re: gpz1100 MLS Cometic head gasket
Thanks all - no one was answering their phone today so will try again tomorrow. This gasket is for my old B2 motor - the engine I was having all the trouble with now has a MLS gasket in it and has remained leak free for quite some time, long may that continue.
Re: gpz1100 MLS Cometic head gasket
Im sure there will be plenty about but if you get stuck i have a brand new one here you can have and replace in youre own time.
AL
AL
1981 J1
Re: gpz1100 MLS Cometic head gasket
Thanks Al, sorted with that but got other probs that mean the motot cant go back ytogether yet.
Who is online
Users browsing this forum: No registered users and 180 guests