Been trolling on Johnnys vintage motorcycles, noticed how nice a LTD looks when turn signals are repositioned either side of headlamp, looks straight forward but does anyone have any knowledge regarding parts needed or done this mod?
Thanks in advance
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
KZ1000 LTD front turn signals
Moderators: paul doran, Taffus, KeithZ1R, chrisu
-
- Hardcore
- Posts: 2051
- Joined: 3rd Apr 2009
- Location: leverington UK
Re: KZ1000 LTD front turn signals
go for CSR 1000/650 front indicators/signals on ebay you will find some on there, i have a set but i don't know what happened to the clamps.
https://www.ebay.co.uk/itm/Kawasaki-Z44 ... SwUYtdztcP
https://www.ebay.co.uk/itm/Kawasaki-Z44 ... SwUYtdztcP
Re: KZ1000 LTD front turn signals
Thanks
I was thinking of using the Z1 stems and flashers.
I was thinking of using the Z1 stems and flashers.
-
- Hardcore
- Posts: 2051
- Joined: 3rd Apr 2009
- Location: leverington UK
Re: KZ1000 LTD front turn signals
I was on a different page, I have them on my Ltd, I just bought the whole part and they fit straight on
Re: KZ1000 LTD front turn signals
kev edwards wrote:I was on a different page, I have them on my Ltd, I just bought the whole part and they fit straight on
Do they need the correct rubber as usually fitted in normal Z1 headlamp brackets?
-
- Hardcore
- Posts: 2051
- Joined: 3rd Apr 2009
- Location: leverington UK
Re: KZ1000 LTD front turn signals
No i don't have original style rubbers ltd headlamp bracket not the same, but i put some 2mm rubber between stem and bracket, here is a pic, bit dusty, been sawing some timber up in the garage.
Re: KZ1000 LTD front turn signals
kev edwards wrote:No i don't have original style rubbers ltd headlamp bracket not the same, but i put some 2mm rubber between stem and bracket, here is a pic, bit dusty, been sawing some timber up in the garage.
20200219_194741.jpg
Just the look I’m after, thank you.
Re: KZ1000 LTD front turn signals
kev edwards wrote:No i don't have original style rubbers ltd headlamp bracket not the same, but i put some 2mm rubber between stem and bracket, here is a pic, bit dusty, been sawing some timber up in the garage.
20200219_194741.jpg
Just got Z1 chrome stems, did you enlarge the hole in headlamp mounting bracket, or make it the same shape as the stem, it’s got that oval shape on the stem?
Need to factor in headlamp aim/adjustment too.
Who is online
Users browsing this forum: No registered users and 209 guests