Page 1 of 1
KZ1000 LTD front turn signals
Posted: Wed Feb 19, 2020 12:39 pm
Author: Arnold62
Been trolling on Johnnys vintage motorcycles, noticed how nice a LTD looks when turn signals are repositioned either side of headlamp, looks straight forward but does anyone have any knowledge regarding parts needed or done this mod?
Thanks in advance
Re: KZ1000 LTD front turn signals
Posted: Wed Feb 19, 2020 3:38 pm
Author: kev edwards
go for CSR 1000/650 front indicators/signals on ebay you will find some on there, i have a set but i don't know what happened to the clamps.
https://www.ebay.co.uk/itm/Kawasaki-Z44 ... SwUYtdztcP
Re: KZ1000 LTD front turn signals
Posted: Wed Feb 19, 2020 4:27 pm
Author: Arnold62
Thanks
I was thinking of using the Z1 stems and flashers.
Re: KZ1000 LTD front turn signals
Posted: Wed Feb 19, 2020 4:51 pm
Author: Arnold62
As per this picture.
Re: KZ1000 LTD front turn signals
Posted: Wed Feb 19, 2020 5:33 pm
Author: kev edwards
I was on a different page, I have them on my Ltd, I just bought the whole part and they fit straight on
Re: KZ1000 LTD front turn signals
Posted: Wed Feb 19, 2020 7:39 pm
Author: Arnold62
kev edwards wrote:I was on a different page, I have them on my Ltd, I just bought the whole part and they fit straight on
Do they need the correct rubber as usually fitted in normal Z1 headlamp brackets?
Re: KZ1000 LTD front turn signals
Posted: Wed Feb 19, 2020 7:57 pm
Author: kev edwards
No i don't have original style rubbers ltd headlamp bracket not the same, but i put some 2mm rubber between stem and bracket, here is a pic, bit dusty, been sawing some timber up in the garage.
Re: KZ1000 LTD front turn signals
Posted: Wed Feb 19, 2020 8:05 pm
Author: Arnold62
kev edwards wrote:No i don't have original style rubbers ltd headlamp bracket not the same, but i put some 2mm rubber between stem and bracket, here is a pic, bit dusty, been sawing some timber up in the garage.
20200219_194741.jpg
Just the look I’m after, thank you.
Re: KZ1000 LTD front turn signals
Posted: Sun Mar 22, 2020 9:20 pm
Author: Arnold62
kev edwards wrote:No i don't have original style rubbers ltd headlamp bracket not the same, but i put some 2mm rubber between stem and bracket, here is a pic, bit dusty, been sawing some timber up in the garage.
20200219_194741.jpg
Just got Z1 chrome stems, did you enlarge the hole in headlamp mounting bracket, or make it the same shape as the stem, it’s got that oval shape on the stem?
Need to factor in headlamp aim/adjustment too.