Page 1 of 1
Front sprocket cover
Posted: Thu Mar 19, 2020 9:22 pm
Author: Robw
I have a cover that came with a gpz1100b1 engine, but when you try to fit to the engine in the gpz1100 b1 frame, the lower right corner hits the frame. That corner is more square than a J or gpz one, also the gear lever pivot and mount are closer together than on the j I have had it ceracoated and new seals fitted, so i am abit miffed. Anyone have any ideas what it originally came off?
Rob
Re: Front sprocket cover
Posted: Thu Mar 19, 2020 9:57 pm
Author: 8 Valve Mark
maybe a z1000 mk2 rob?
Re: Front sprocket cover
Posted: Thu Mar 19, 2020 10:05 pm
Author: Robw
I will have a look.
Cheers Rob
Re: Front sprocket cover
Posted: Fri Mar 20, 2020 3:33 am
Author: popsA1
It sounds like a Unitrak cover to me. The pic, I believe, is an 1100B cover. If the gear linkage hanger is directly below the gear position numbers as I’ve drawn and there’s the bit to the lower right corner, it could well be from an 1100A. If it is I would be interested in it. I have a couple of B covers if you want. Not as good as this one. But B covers are more common.
- SprocketCover2.JPG (76.63 KiB) Viewed 2044 times
PM me if you’re interested.
Re: Front sprocket cover
Posted: Fri Mar 20, 2020 6:41 am
Author: Robw
You have pm