Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Resistor plug caps
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Resistor plug caps
Can I fit resistor plug caps (say NGK LB05F) to non resistor NGK B8ES PLUGS ? Cheers all
Re: Resistor plug caps
I think they’ll work okay, but you can take the little resistors out by unscrewing the inner brass connector (the bit that fits to the spark plug) and remove it and use a short bit of metal to replace it - you can cut up a small bolt or similar.
Careful not to loose the tiny spring!
Careful not to loose the tiny spring!
And on the 7th day... Zeds were created!
Re: Resistor plug caps
Yes!
As long as you have only one source of resistance you are ok.
As long as you have only one source of resistance you are ok.
Re: Resistor plug caps
I thought I'd been using those caps and plugs all the time and just used them as they were.
Z1b,
zxr750 m2,
zrx1200
Z1000j lawson race bike,
Versys 1000gt (2019),
Gsxr750H.
zxr750 m2,
zrx1200
Z1000j lawson race bike,
Versys 1000gt (2019),
Gsxr750H.