Hi All,
I am wanting to fit a hydraulic clutch conversion on the cheap. I have a spare sprocket cover and want to bolt on to the outside a suitable slve cylinder. Anybody else done it this way and can recommend a suitable cylinder?
Thanks
Dave
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
gpz1100 hydraulic clutch
Moderators: paul doran, Taffus, KeithZ1R, chrisu
-
Julian_Boolean
- Custard Cream
- Posts: 804
- Joined: 20th Oct 2016
- Location: Ipswich
Re: gpz1100 hydraulic clutch
Hi Dave, I've got a Tom Forde conversion bracket, it uses a ZXR750J2 slave cylinder and I've got a ZX9r master cylinder, but the bracket doesn't do anything a flat plate of ally wouldn't do so long as the holes were in the right places, you'd need to hold the plate on with long M6 bolts, but this is all that holds the original casing on, just remember all the pressure pulls on these bolts and there is no push on them.
An expanding collection of parts pretending to be a Z1100R and a Yamaha FZ750
Who is online
Users browsing this forum: No registered users and 172 guests