Z1OwnersClub GB

Hi All,
I am wanting to fit a hydraulic clutch conversion on the cheap. I have a spare sprocket cover and want to bolt on to the outside a suitable slve cylinder. Anybody else done it this way and can recommend a suitable cylinder?
Thanks
Dave

Hi Dave, I've got a Tom Forde conversion bracket, it uses a ZXR750J2 slave cylinder and I've got a ZX9r master cylinder, but the bracket doesn't do anything a flat plate of ally wouldn't do so long as the holes were in the right places, you'd need to hold the plate on with long M6 bolts, but this is all that holds the original casing on, just remember all the pressure pulls on these bolts and there is no push on them.