Good Afternoon All,
Can anyone help me with a part number for the rubber boot/cover that fits over the oil pressure switch on the back of the engine?
Also, which fuel delivery T pieces do you recommend for the standard carbs.
I’m stripping and rebuilding them and even though they look ok and aren’t leaking I think it would be daft to not replace them.
My bike is Z1000A1 1977.
Cheers.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000A1 Oil pressure switch boot.
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Re: Z1000A1 Oil pressure switch boot.
Hi,
sorry do not know the part number for the oil pressure switch boot, but Z-Power sell repro ones for the Z1000 A1.
Cheers Tim
sorry do not know the part number for the oil pressure switch boot, but Z-Power sell repro ones for the Z1000 A1.
Cheers Tim
"Better to remain silent and be thought an idiot, than to open your mouth and remove any doubt" - Abraham Lincoln
Z900A4 / Hodna CBXZ / Ducati Diavel / H1F 500 Mongrel / CBXZ Project / RD400 project
Z900A4 / Hodna CBXZ / Ducati Diavel / H1F 500 Mongrel / CBXZ Project / RD400 project
Re: Z1000A1 Oil pressure switch boot.
Cheers for that.
I thought the rubber cap might have carried a separate part number but the one from Z Power should do the trick.
I thought the rubber cap might have carried a separate part number but the one from Z Power should do the trick.
Who is online
Users browsing this forum: No registered users and 235 guests