Z1OwnersClub GB

Hi All
Does anyone know what is an acceptable vertical (Up & down) movement for piston rings on standard ART pistons on Z1000 A1?

Also the vertical height of the slots?

Thanks

David

According to the genuine Kawasaki manual for the A1:

Top ring groove clearance 0.040 - 0.080 mm (service limit 0.15 mm)
2nd ring groove clearance 0.030 - 0.070 mm (service limit 0.15 mm)

Groove widths
Top 1.23 - 1.25 mm (service limit 1.33 mm)
2nd 1.22 - 1.24 mm (service limit 1.32 mm)
Oil 2.51 - 2.53 mm (service limit 2.60 mm)

[quote="TiBolts"]According to the genuine Kawasaki manual for the A1:

Top ring groove clearance 0.040 - 0.080 mm (service limit 0.15 mm)
2nd ring groove clearance 0.030 - 0.070 mm (service limit 0.15 mm)

Groove widths
Top 1.23 - 1.25 mm (service limit 1.33 mm)
2nd 1.22 - 1.24 mm (service limit 1.32 mm)
Oil 2.51 - 2.53 mm (service limit 2.60 mm)

[/quote]

Thanks for the numbers.
Fingers crossed! (Certainly seemed more play than that when I wiggled it up and down)