Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
z900 A4 630 to 530 conversion
Moderators: chrisu, paul doran, Taffus, KeithZ1R
z900 A4 630 to 530 conversion
Hi, can anyone tell me if a 530 chain and sprocket conversion kit for the z1000 A1-A2 will fit a z900 A4 . Is the engine output shaft the same on both?. Any comments welcome even if you think it's not worth bothering. I do need a new set anyway. Thanks in advance, Graham.
Re: z900 A4 630 to 530 conversion
All the output shaft splines on every 903/1015cc kickstart engine is the same.
Re: z900 A4 630 to 530 conversion
Have a look on the JTS Sprockets website their diagrams are useful for comparing sizes offset etc.
From memory they also list a 530 conversion kit.
From memory they also list a 530 conversion kit.
Re: z900 A4 630 to 530 conversion
I converted my z1B to 530 conversion Chain / sprox etc as a kit from debbens . The number of teeth will be different to the stock ones but they'd already sorted that out.
Z1b,
zxr750 m2,
zrx1200
Z1000j lawson race bike,
Versys 1000gt (2019),
Gsxr750H.
zxr750 m2,
zrx1200
Z1000j lawson race bike,
Versys 1000gt (2019),
Gsxr750H.
Who is online
Users browsing this forum: Gray17 and 69 guests