Hi guys,
I was out the other day on my Z900 A4 and the bike started to run a little on the rough side, just checked the spark across the 4 leads and No. 2 and 3 is a lot weaker than 1 & 4 .
I have a dyna pickup and dyna coils fitted and the wired George mod, how do I go about testing whether the coil is at fault Or should I be looking elsewhere.
TIA
Gavin
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Weak spark on No.2 and No.3
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Weak spark on No.2 and No.3
Z1000 MK2
Z1300 DFI
Z1300 DFI
Re: Weak spark on No.2 and No.3
swap coils over, if weak spark moves to 1&4 it will be coil
Re: Weak spark on No.2 and No.3
Are those the same coils that can have a tendency to short-out on the frame if not careful ?
(hopefully, others with more knowledge will comment on this)
(hopefully, others with more knowledge will comment on this)
H2B GPZ900R
Re: Weak spark on No.2 and No.3
Appears to be sorted now, found a fair bit of corrosion where the lead enters the coil
Z1000 MK2
Z1300 DFI
Z1300 DFI
Who is online
Users browsing this forum: No registered users and 92 guests