Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Cylinder & head rubbers
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Cylinder & head rubbers
Just got some new block damper rubbers (x 8) and head semi-circular cam end rubbers (x 4) from Z-Power for my Z1-B rebuild. Should the block rubbers be installed with a dab of Threebond or do they go in dry? With regards to the cam end rubbers what is the best way to secure them? Any advice greatly appreciated.
Z1-B, 400bhp ZX1000NGF
90% of questions that begin "Why..." can be answered with "Because people are stupid."
90% of questions that begin "Why..." can be answered with "Because people are stupid."
Re: Cylinder & head rubbers
Hi
As for the block rubber just a slight dad grease to hold in position also a small smear of silicone on the cam end rubbers . All will be held when head and cam cover are replaced
Phil
As for the block rubber just a slight dad grease to hold in position also a small smear of silicone on the cam end rubbers . All will be held when head and cam cover are replaced
Phil
Never Dull in Hull Watch no 31
International Rep
International Rep
Re: Cylinder & head rubbers
Many thanks young sir
Z1-B, 400bhp ZX1000NGF
90% of questions that begin "Why..." can be answered with "Because people are stupid."
90% of questions that begin "Why..." can be answered with "Because people are stupid."
Who is online
Users browsing this forum: DavidZ1R, Maunders, wilsonsjw11 and 60 guests