Page 1 of 1
Fitting a stator to a Z1B
Posted: Mon Sep 07, 2020 4:08 pm
Author: Zedorset
I want to fit a new stator to my Z1B, do I have to tilt the bike over or drain the oil, or can it be safely changed whilst on the centre stand, any advice would be much appreciated
Re: Fitting a stator to a Z1B
Posted: Mon Sep 07, 2020 7:05 pm
Author: Mr Bump
The stator housing is well above the oil level when the bikes on a mainstand, so you'll only loose the little bit of oil that'll be hanging around in the housing.
Olly
Re: Fitting a stator to a Z1B
Posted: Mon Sep 07, 2020 8:28 pm
Author: Zedorset
Thanks Olly
: