Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Non starter
Moderators: chrisu, paul doran, Taffus, KeithZ1R
-
Grimreaper
- Regular Poster
- Posts: 61
- Joined: 4th Jan 2018
- Location: Morsy
Non starter
Hi troops, hope you can help, was out on my Z1000R2 today, stopped for 10mins, went to go again and pressed the electric start and nothing?????? Al fuse are ok. Any ideas ? Thanks Mike
Re: Non starter
Dodgy connection on wiring - could be anything, but check obvious stuff like kill switch not grounding at bars, fuse box area & associated wires......etc.
Start wiggling wires - one area at a time & try starting each time - may isolate problem if lucky?
Good luck!
Start wiggling wires - one area at a time & try starting each time - may isolate problem if lucky?
Good luck!
And on the 7th day... Zeds were created!
Who is online
Users browsing this forum: sean_rfi and 80 guests